Leqephe la polasetiki la boenjiniere la UHWMPE PE1000
Qaqiso ea Sehlahisoa:
Polyethylene - Boima bo Phahameng ba Limolek'hule
PE1000 e na le ho hanyetsa ho hoholo ha ho kgopama, thepa e ntle ya ho thella le ho tiea ho hoholo. E na le ho hanyetsa ho hotle ha dikhemikhale, matla a ho otla a hodimo le ho monya mongobo o tlase. PE1000 e boetse e latela dijo bakeng sa ditshebediso tsohle tsa bohlokwa tsa ho sebetsana le dintho.
| Mokhoa oa ho Sebetsa | Bolelele(mm) | Bophara(mm) | Botenya (mm) |
| Boholo ba Lakane ea Hlobo | 1000 | 1000 | 10-150 |
|
| 1240 | 4040 | 10-150 |
|
| 2000 | 1000 | 10-150 |
|
| 2020 | 3030 | 10-150 |
| Boholo ba Lakane ea Extrusion | Bophara: botenya＞20mm, max e ka ba 2000mm；botenya≤20mm, max e ka ba 2800mmBolelele: bo sa lekanyetsoangBotenya: 0.5 mm ho isa ho 60 mm | ||
| 'Mala oa Leqephe | Tlhaho; botsho; bosweu; boputswa; botala le tse ding | ||
Tšobotsi ea Sehlahisoa:
1.Khanyetso e matla e lulang e na le polymer ea thermoelectricity.
2.Khanyetso e ntle ka ho fetisisa ea ho makala esita le mochesong o tlase.
3.Ntho e tlase ea khohlano, le thepa ea ho jara e thellang hantle.
4.Matla (ha ho na ho kenngwa, ho khomaretswe).
5.Khanyetso e ntle ka ho fetisisa ea ts'enyeho ea lik'hemik'hale le khanyetso ea khatello ea maikutlo.
6. Bokhoni bo botle ba ho sebetsa ka mechine.
7. Ho monya metsi ka tlase ka ho fetisisa (<0.01%).
8. Paragon motlakase insulativity le boitšoaro antistatic.
9. Khanyetso e ntle ea mahlaseli a kotsi a matla a phahameng.
10. Botenya bo tlase ho feta thermoplastics tse ling (< 1g/m3).
11.Mofuta o molelele wa mocheso o sebediswang: -269°C--85°C.
Teko ea Sehlahisoa:
Khanyetso e phahameng ea ho khohlela
| Lisebelisoa | UHMWPE | PTFE | Nylon 6 | Tšepe A | Fluoride ea polyvinyl | Tšepe e pherese |
| Sekhahla sa ho Aparoa | 0.32 | 1.72 | 3.30 | 7.36 | 9.63 | 13.12 |
Thepa e ntle ea ho itlotsa, khohlano e tlase
| Lisebelisoa | Mashala a UHMWPE | Mashala a lahleloa ka majoe | E khabisitsoeng poleiti-mashala | Ha se mashala a rokeletsoeng a poleiti | Mashala a konkreite |
| Sekhahla sa ho Aparoa | 0.15-0.25 | 0.30-0.45 | 0.45-0.58 | 0.30-0.40 | 0.60-0.70 |
Matla a tšusumetso e phahameng, ho tiea hantle
| Lisebelisoa | UHMWPE | Lejoe le betliloeng | PAE6 | POM | F4 | A3 | 45# |
| Tšusumetso matla | 100-160 | 1.6-15 | 6-11 | 8.13 | 16 | 300-400 | 700
|
Tshebetso ea Sehlahisoa:
| Ntho ea Teko | Mokhoa oa Teko | Sephetho |
| Koefficient e sa fetoheng ea Khohlano (ps) | ASTM D1894-14 | 0.148 |
| Kinetic Coefficient of Friction (px) | ASTM D1894-14 | 0.105 |
| Modulus ea ho Flexural | ASTM D790-17 | 747MPa |
| Matla a Tšusumetso a Notched ea Izod | Mokhoa oa ASTM D256-10C1 A | 840J/m P (khefu e sa fellang) |
| Ho tiea ha lebōpo | ASTM D2240-15E1 | D/64/1 |
| Modulus ea Tensile | ASTM D638-14 | 551 MPa |
| Matla a tšepe | ASTM D638-14 | 29.4MPa |
| Ho Lelefatsa Nako ea Phomolo | ASTM D638-14 | 3.4 |
Ho paka Sehlahisoa:
Kopo ea Sehlahisoa:
