Polyethylene PE1000 Rod e rekisoang ka bongata – Moetsi le Mofani oa UHMWPE

Molamu oa Polyethylene PE1000 – UHMWPE

Molamu oa Polyethylene PE1000 – Setšoantšo se Hlahisitsoeng sa UHMWPE

tlhaloso e khutšoanyane:

Polyethylene PE1000 – Thupa ea UHMWPE e na le khanyetso e phahameng ea ho tsofala le matla a ho thula ho feta PE300. Hape UHMWPE ena e na le khanyetso e phahameng ea lik'hemik'hale, thepa e tlase ea ho monya mongobo 'me e matla haholo. Thupa ea PE1000 e amohetsoe ke FDA 'me e ka etsoa le ho tjhesetsoa.

Romella imeile ho rona Mohala Imeile

Qaqiso ea Sehlahisoa

Li-tag tsa Sehlahisoa

Uhmw Pe 1000 Rod:

PE Rod ha e na monko, ha e na chefo, e ikutloa joaloka boka ba linotši, e na le khanyetso e ntle ea mocheso o tlase (mocheso o tlase o ka fihla ho 70 ~ 100 °C), botsitso ba lik'hemik'hale bo botle, boholo ba khoholeho ea asiti le alkali (asidi) e nang le litšobotsi tsa khanyetso ea oxidation, mocheso ha o qhalane ka har'a li-solvents, metsi a manyane a sa keneleng metsi, thepa e ntle ea ho thibela motlakase; Bongata bo tlase; Ho tiea ho hotle, ho boetse ho sebetsa maemong a mocheso o tlase); Ho otlolla ho hotle; Ho thibela motlakase le dielectric; Sekhahla sa bibulous se tlase; Ho kenella ha mouoane oa metsi ho tlase; Ho tiea ho hotle ha lik'hemik'hale; Ha ho na chefo e kotsi.

Empa PE Rod bakeng sa kgatello ya tikoloho (phello ya dikhemikhale le ya mechine) e bonolo haholo, e tsofala ka mocheso.

Likarolo tsa lisebelisoa tsa bongaka, litiiso, mapolanka a ho seha, liprofaele tse thellang. E sebelisoa haholo indastering ea lik'hemik'hale, mechineng, indastering ea lik'hemik'hale, matla a motlakase, liaparong, liphuthelong, lijong le liindastering tse ling. E sebelisoa haholo phetisong ea khase, phepelong ea metsi, drainageng, nosetsong, merafong ea likaroloana tse tšesaane tsa phepelo e tiileng, le tšimong ea oli, indastering ea lik'hemik'hale le likhokahanong tsa mehala le masimong a mang, haholo-holo phepelong ea khase e sebelisitsoe haholo.

Melemo ea molamu oa uhmwpe:

1. Matla a ho thapolla
2. Matla a phahameng a tshusumetso le a ho thibela tshusumetso
3. Mocheso o phahameng oa ho kheloha ha mocheso
4. Matla a phahameng le ho thatafala
5. Litlhaku tse ntle tsa ho thella le tse bonolo tsa lapeng
6. Ho ba le botsitso bo botle ba lik'hemik'hale khahlanong le li-solvents le mafura a tlhaho
7. E hanela botsofali ba mocheso (mocheso o sebetsang pakeng tsa -60°C le 190°C
8. Phetoho ea boholo ka ho monya mongobo e lokela ho nahanoa

Masimo a ts'ebeliso ea ROD ea uhmwpe:

Likarolo tse apereng, likarolo tsa phetisetso, likarolo tsa lisebelisoa tsa lapeng, likarolo tsa likoloi, molamu oa terata ho thibela likarolo tsa mochini, likarolo tsa mechini ea lik'hemik'hale, lisebelisoa tsa lik'hemik'hale, tse kang turbine, gear, bearing, impeller, shaft, dashboard, shaft ea drive, valve, blades, molamu oa terata, li-washer tsa khatello e phahameng, li-screw, linate, litiiso, shuttle bushing, sehokelo, jj.

Boholo ba melamu

'Mala	Bolelele ba Thupa (mm)	Bophara ba molamu (mm)
-	-	20	25	30	35	40	50	60	65	70	80	90	100
Tlhaho	2000	*	*	*	*	*	*	*	*	*	*	*	*
Tlhaho	1000	*	*	*	*	*	*	*	*	*	*	*	*
Botsho	2000	*	-	*	-	*	*	*	*	*	*	*	*
Botsho	1000	*	-	*	-	*	*	*	*	*	*	*	*
Botala	2000	*	-	-	-	*	*	*	-	*	*	*	*
Botala	1000	*	-	-	-	*	*	*	-	*	*	*	*
Putsoa	2000	*	-	-	-	*	*	-	-	-	*	-	*
Putsoa	1000	*	-	-	-	*	*	-	-	-	*	-	*

'Mala	Bolelele ba Thupa (mm)	Bophara ba molamu (mm)
-	-	110	120	130	140	150	160	180	200	230	250	300
Tlhaho	2000	*	*	*	*	*	*	*	*	*	-	-
Tlhaho	1000	*	*	*	*	*	*	*	*	*	*	*
Botsho	2000	*	*	*	*	*	*	*	*	-	-	-
Botsho	1000	*	*	*	*	*	*	*	*	*	*	*
Botala	2000	*	*	*	*	*	*	*	*	-	-	-
Botala	1000	*	*	*	*	*	*	*	*	-	-	-
Putsoa	2000	-	*	-	-	-	-	-	-	-	-	-
Putsoa	1000	-	*	-	-	*	-	-	-	-	-	-

Tlhaloso ea UHMW-PE ha e bapisoa le polasetiki e 'ngoe ea Boenjiniere

Ntho	Karolo	UHMW-PE	ABS	PA-66	POM	PTFE
Botenya	g/cm^3	0.935	1.03	1.41	1.41	2.14-2.30
Flash point	ºC	136	165	25	165	327
Ntlha ea khohlano	--	0.1-0.22	--	0.15-0.40	0.15-0.35	0.04-0.25
Sekhahla sa ho Monya Metsi	%	<0.01	0.20-0.45	1.5	0.25	<0.02
Matla a tšepe	MPa	≥38	22-28	≥80	62-70	15-35
Ho Lelefatsa Nako ea Phomolo	%	≥300	≥53	≥60	≥40	200-400
Matla a Tšusumetso	KJ/m^2	70	≥22	4.5	--	--
Ho hanyetsa molumo	Ω.cm	10^17	10^15	5*10^14	10^14	>10^17
Monyetla oa ho Robeha	KV/mm	50	15	15	20	20
Dielectric Constant	10^6HZ	2.2	2.4	3.7	3.7-3.8	1.8-2.2
Tahlehelo ea Dielectric Tahlehelo	10^6HZ	≤5*10^-4	4*10^-2	2*10^-2	5*10^-2	≤2.5*10^-4